Tree Guy Line Kits Model 40 DTS Kit Model 68 DTS Kit Model 88 DTS Kit Model 138 DTS Kit Root Ball Kits Model 40 RBK Kit Model 68 RBK Kit Model 88 RBK Kit Multi Purpose Anchors Model 40-DBI Model 68-DBI Model 88-DBI Model 138-DBI Security/Anti-Theft Anchors Model 68-AT1 Model 88-AT1 Model 68-ATC Model 88-ATC Drive Steels Model DS-40 Model DS-68 Model DS-68HD Model DS-88 Special Applications Palm Tree Strap Model 68 DTS Kit For Trees Up To 6-inch (150mm) Diameter Model 68 DTS Installation Instructions 1. Drive anchor approximately 28” to 30” (700mm to 750mm) into the ground using heavy hammer and DS68 round steel drive rod (not included in kit). Rod has ½” (13mm) round driving tip. 2. Remove drive steel Pull up by winding cable around drive steel or grabbing turnbuckle. This rotates anchor into anchor lock position like a toggle bolt in undisturbed earth 3. FULLY OPEN TURNBUCKLE Place tree collar around tree above the tree limb. Insert wire rope through tree collar and adjust until wire rope is taut. Securely attach 2 wire rope clamps as shown in drawing. Adjust turnbuckle. Install additional Duckbill tree supports. ANCHOR MUST BE DRIVEN INTO THE EARTH AT THE INTENDED ANGLE OF THE GUYLINE

©2009 Foresight Products, LLC